Commodity : 2inch 7*50 LED messager
Demension ;98 (H) X 435 (L) X 35 (D)
Color: Red; Green; Blue; Pink & Amber is available.
Features:
Pixel & Resolution: 5.00mm; 7X50 dots
active area :54mmX382mm
Edit Style: Infra-red remote & RS232/RS485 programming interface
Power: AC powered & 2 batteries for remote control
A. FUNCTIONS
a. Can save 9 messages, each message can show max 250 characters.
b. 3 speeds only.
B. Creating a Text Message
Step 1:
Connect the electric power supply 12V. ON/OFF button to turn on or turn off the display.
Step 2:
Press the EDIT button. This puts the display into edit mode. The screen will display:
Note: The number after “P” indicates the memory location(in this case, location
1)Total 9 memory locations(P:1…P:9).To change a memory location, press button 1 to 9.Press ENT, it will show blinking rectangle, then inputs information by the characters in the remote control surface “A…Z, a…z,!@#$%^&*()_+[]{}=\/<>,.’” ?” CAP to change the big and small letter. Press CRL, it shows CLR?, press N, back to the edit mode, press Y, it will clear the messages and back to the default setting. Press ENT to make your confirmation.
Step 3:
Press the SPD button. The display will show the scrolling speed for the message:
Note: SP indicates the speed at which your message will scroll.
SP1: fast
SP2: moderate
SP3: slow
Three speeds. To change the speed, press number 1 to 3.Press ENT to make your confirmation.
Packing:
size :715*505*315cm,8pcs/ctn,15kg
